Tape Operation - Panasonic OmniVision PV-C1321-K Service Manual

Tape Operation

Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information is also included.
These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
1
I NDEX SEARCH
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
FORWARD SEARCH : FF
REVERSE SEARCH : REW
NEXT : SEARCH
EX I T : STOP
2
I NDEX SEARCH 3
I NDEX SEARCH
3
I NDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW
To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3
NOTE: indicates start points of each recording.
Notes
• Make each entry within 10 seconds, or the
Index Search mode will be cancelled.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
28
Press SEARCH*
in Playback or
Stop mode to
display INDEX
SEARCH screen.
Press
number keys
to select the
recording number.
• To calculate
number, see below.
Press FF or REW
to start search.
• Play begins at search
end. To search
forward or back 1
index, press FF or
REW while screen
left in displayed (10
seconds).
4 5 6
4 5 6
Program End Search
Locates end point of recording for continuity.
1
Press SEARCH twice in Playback or
Stop mode to display PROGRAM END
SEARCH screen .
2
PROGRAM END SEARCH
SEARCH START
EX I T : SEARCH
Example of Program End Search operation.
Fig.1
Program 1
Press SEARCH button
Fig.2
Program 1
Press SEARCH button
Fig.3
If search exceeds a few seconds in BLANK area.
Program 1
End Point
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
7
Press SEARCH button
7
Notes
• If Program End Search is started very close
to an index mark, that mark may be
skipped over.
• To cancel, press PLAY or STOP.
Press FF
to start search.
: FF
PLAYBACK DIRECTION
Program 2 or BLANK
End Point
FF
BLANK Program 2
FF
Press SEARCH button
BLANK
FF
BLANK
End Point
Program 2