Tape Operation; Index Search - Panasonic PV-C921-K Operating Instructions Manual

Tape Operation

Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information is also included.
(Only AC POWER) These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.
1 Press SEARCH in
I NDEX SEARCH
Playback or Stop
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
mode to display
INDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW screen.
NEXT : SEARCH
EX I T : STOP
2
Press number
I NDEX SEARCH 3
keys
I NDEX SEARCH
to select the
recording number.
• To calculate
number, see below.
3
Press FF or REW
I NDEX SEARCH
to start search.
• Play begins at search
end. To search
forward or back 1
FORWARD SEARCH : FF
index, press FF or
REVERSE SEARCH : REW
REW while screen
left in displayed (10
seconds).
I To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3 4 5
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3 4 5
NOTE: indicates start points of each recording.
Notes
• Make each entry within 10 seconds, or the
Index Search mode will be cancelled.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
26
6 7
6 7