Tape Operation; Index Search - Panasonic OmniVision PV-C2023-K Operating Instructions Manual

Tape Operation

Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are
made, program index and information are also included. These index marks can be used to access or
scan recordings.

Index Search

Go directly to the desired recording.
1
I NDEX SEARCH
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
FORWARD SEARCH
REVERSE SEARCH
EX I T : SEARCH
2
I NDEX SEARCH
FORWARD SEARCH
REVERSE SEARCH
■ To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3
NOTE: indicates start points of each recording.
Note
• If Index Search is started very close to an index mark, that
index mark may not be counted in the search.
24 24
Press SEARCH in
Playback or Stop
mode to display
INDEX SEARCH
screen, and then
: FF
: REW
press number keys
to select the recording
number.
• To calculate number, see
below.
Press FF or REW to
start search.
Play begins at
search end.
To search forward
or back 1 index,
press FF or REW
while screen
: FF
: REW
left is displayed
(10 sec.).
To cancel, press
PLAY.
4 5 6 7
4 5 6
VIDEO IN AUDIO IN
7
NUMBER Keys
FF
SEARCH
REW
POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER/FM
REC ON TIMER PROG TIMER
ACTION
FF
REW