Playback A Tape - Panasonic Omnivision PV-M2048-K Operating Instructions Manual

Playback a Tape
*Important: If the remote control POWER, CH &V, ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/rV and ADD/DLT
button does not work when pressed, press the TVNCR button on the remote and try the button again.
I_PCheck list before you begin.
[] All connections are made (see page 5).
[] Your Combination VCR is plugged in.
Model PV-M2058 unit is shown here.
1
Insert a cassette.
• The Combination VCR power comes on automatically.
t Press PLAY on the remote control or Combination VCR
to start playback.
• Playback begins automatically if cassette has no record tab (see
page 26).
3
Press STOP on the remote control or Combination VCR
to stop playback.
• To rewind the,tape, press REW.
T.ACK,. 3"4
V-LOCK
1
PLAY
2
FF/REW
Search
Press STOP/EJECT on the Combination VCR to eject
the cassette.
• You may eject a cassette with power on or off.
To Find a Particular Scene During Playback
Press REW or FF on the remote control or C_)mbination
VCR to quickly locate a scene.
• Search speed for SP mode tapes is 7 times <For Model PV-M2058 only>
and SLP mode tapes 21 times the normal speed.
• Some noise bars will appear during search.
TRACKING/
V-LOCK
FFIREW
Search
.PLAY
2
PAUSE
•SLOW
Model PV-M2058_remote
is shown here.
_Caution:
Please inspectyourcassettetapes
and removeany looseor peeling
labelsto preventthem from
becoming jammed in yourunit.
16
Special Effects During Playback
These features work best in SP <For Model PV-M2058 only> or SLP mode.
The sound will be muted.
Slow Motion Playback
Press SLOW to start slow motion playback. Press PLAY or SLOW to release.
Still (Freeze_ Frame Picture
Press PAUSE to freeze and release the picture.
• To reduce picture noise, first press SLOW. Next, use the 3 or 6
NUMBERED key on the remote control or CH AV ° on the Combination
VCR to clear up the picture. Now, press PAUSE.
Frame by Frame Advance
While in Still mode, press SLOW repeatedly or hold down to advance the
still picture one frame at a time. Press PAUSE or PLAY to release.
(After the Combination VCR is in Still or Slow mode for 3 minutes, it will
switch to the Stop mode automatically to protect the tape and the video
head.)
Features for a Quality. Picture ,
DiQital Auto Tracking
This feature continuously analyzes the signal and adjusts for optimum
picture quality.
Manual Tracking Control
Use during Playback and Slow Motion mode to reduce picture noise.
Press the 3 or 6 NUMBERED key on the remote control or CH AT on the
Combination VCR until the picture clears up.
To return to Auto Tracking, press POWER off and then on again..
V-Lock Control <For Model PV-M2058 only>
In Still mode, the 3 or 6 NUMBERED k_e¥on the remote control or CH AT
on the Combination VCR operate as a V-Lock control to reduce jitter. Press
one of these keys until the picture is stabilized.
PanaBlack
TM
Picture T_!_
This Combination VCR uses a PanaBlack
TM
picture tube for better color
reproduction and picture contrast.