Table of Contents
Advertisement
In orderforthe Combination VCR to read the VCR Plus+code,some setupis required.A Guide (VCR Plus+) channel
numberis assigned to each localbroadcastandcable station.Becausethisnumbersometimesdiffersfrom the channel
yourTV receivesthe stationon, it is necessaryto programthe Combination VCR withlocalchannelinformation.
a
e
VCR Plus+ Channel Setup
For Connection
Type B (page 28) only
• Before you begin, complete the Channel Setup
Preparations below left.
ImDortant Note:
If your Combination VCR Connestlon
type changes, from
Type A to B, repeat step 4 of previous page, select "NO."
a
Press ACTION to display
the MAIN MENU.
b
Press AV4•
to select
"CH," and then press
ACTION to display the
SET UP CHANNEL
screen.
MAIN
MENU
ADD/
DELETE
Model PV-M2058 remote is shown here.
C Press AV to select =VCR
Plus+ CH SET UP," and
then press •
to display
the VCR Plus+ CH SET
UP screen.
ANTENNA:GABLE
AUTO
SET
CHANNEL CAPTION
,_LECYr:A
•
KEY
END
:ACTION
KEY
Channel Setup Preparations
NOTE:
Complete the steps on this page if your Combination
VCR hook-up resembles "B" on page 28.
Prepare a list like the example below.
This list will help you smoothly enter the information
needed in step "d" at right.
You will need the following to complete the list:
• A line up of normal and/or cable stations you
receive along with the channel numbers your TV
receives them on. "Acable channel line-up chart is
supplied by your cable company.
• A list of Guide (VCR Plus+) channel numbers
assigned to the stations you receive. This list is
available in TV Guide and the "IV listings found in
selected newspapers.
1
Make a chart with 3 columns like the example
below. In the left column, fill in the name or call
letters of the stations you receive.
2
In the middle column, fill in each station's
assigned Guide (VCR Plus+) number found in TV
Guide, newspapers, etc.
3
In the right column, fill in the channel number that
your TV receives the station ORfrom your ctt_annel
line-up.
•.
< EXAMPLE
ONLY
>
Broadcast or iAseigned
Guide Channel No. your
Cable Station
(VCR Plus+)
"IV recelvse the
Name
Channel No.
station on
33
15
38
20
34
04
FOX
11
HBO
Nickelodeon
CBS
IMPORTANT NOTE:
For step "d", use the list you prepared at left.
You may leave lines blank if you don't receive
that station, or if the GUIDE CH number and the
CABLE (or TV) CH numbers are the same.
d
Press •
to move the
shaded area to the right
side.
VCR
Plus+
CH
SET
UP
GUIDE
CH
CABLE
CH
-)
m
--
02
--
SELECT:&
•
KEY
SET
:)-
KEY
END
:ACTION
KEY
Then, press &Y
to change
the CABLE (or TV) CH
number.
Next, press • to set the CABLE (or TV) CH number.
Now, press &1' to continue. Repeat this operation
until the list is complete.
To Make Corrections
Press &V
and •" to select the incorrect CABLE or'IV
CH number.
Then, press &_l' to change, or ADD/DLT to delete the
channel.
e
Press ACTION three times to exit the VCR
Plus+ CH SET UP mode.
29
Hide quick links:
Advertisement
Table of Contents
