Panasonic Omnivision PV-M2048-K Operating Instructions Manual page 26

Tape Operation (continued)
*Important: If the remote controlPOWER, CH &V, ACTION,PROG, INDEX,ON-TIMER,R-TUNE,FM/TVandADD/DLT
buttondoes notworkwhen pressed,pressthe TVNCR buttonon the remoteand try the buttonagain.
Your Combination VCR isequippedwith
severaltimesavingfeatures as well as
convenientautomaticfunctions which
maketape operationeasier than ever.
!
2.
4
a
2.
3
b
Repeat Play
You can setyourCombination VCR up to play a recording overand over.
4
/ Press ACTION* to display the MAIN
MENU.
2
Press &V<b to select=VCR,"
and then press ACTION to display
the SET UP VCR screen.
3
Press AV .to select"REPEAT
PLAY," and then press
repeatedly to select "ON" or =OFF."
• When REPEAT PLAY : ON is selected
(the REPEAT indicator lights on the front
MAIN MENU
SELECT A v 4 I_ KEY:
SET :ACTION KEY
...... SET UP VCR ...... ]
BEEPER :OFF J
NOISY CH BLUE BACK:ON I
TIME STAMP :OFF /
i
SELECT:A • KEY /
SET :lb KEY J
END :ACTION KEY ,J
paneldudngplayback),the Combination VCR willplaybackthe
tape to itsend, or untila blankportion of 30 secondsor more is
reached. (Erasedportions of tape are notconsideredblank.)The
tape is then automatically rewoundand playedagain. This
operationis repeateduntilyou cancel Repeat Play.
• Allfunctionbuttons (REW,FF,etc.)areoperational duringRepeatPlay.
4
Press ACTION twice to return to the normal screen.
Model PV-M2058 remote
is shown here.
Auto Operation Functions
Auto Shut Off
In TV or NITE/GAME mode. when a
broadcast signal is not received for 5
minutes, the Combination VCR will
automatically power off (except when
LINE INPUT is selected).
In Plavback mode, when a Video signal
is not detected for 5 minutes, the
Combination VCR will automatically
power off and the tape will be rewound.
• This feature is deactivated when any
button on the unit or remote control is
pressed even if there is no signal present.
Auto Playback
When a tape is inserted, the power
turns on (Auto). If the record tab* is
removed, playback begins (Auto).
Auto Rewind " -
When a tape reaches its end duringplayback
or fast forwardthe CombinationVCR will
rewindthe tape and go intoStop mode.
Playback Auto Eject
(Repeat Play is "OFF.")
When a tape without a record tab* is
played to its end, the Combination VCR
will rewind and then eject the tape.
Memory Rewind Off
When POWER is pressed during tape
rewind, rewinding will be completed even
though the Combination VCR turns off.
* For record tab information,see page 32.
26
: i_icatc)_ lights up:(ON)_
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
A Press ZEROI1 MIN in Play mode.
• The Combination VCR will go into FF search mode and skip over 60
seconds of recorded time. Then, normal playback will resume.
Zero Search
You can reset the Time Counter to zero and then retum to that point.
a
Press DISPLAY to display the Time
Counter overlay during playback.
b
Press COUNTER
RESET to reset the Time
Counter to =0:00:00" at
the desired position.
Model
PV-M2058
only
C continue playback, rewind, or
fast forward.
d
€
STOP 12:00AM
I=STEREO*-
"I_SAP
MONO
STOP 12:00AM
If S'rEREO4-
"I_SAP
MONO
ABC
0:00:30
SP
ABC
0:00:00
SP
Press ZERO/1MIN in Stop mode when you want to
return to =0:00:00."
• The Combination VCR will go into FF or REW mode and stop at the
last point the Time Counter was set to 0:00:00.