Safety Information; About The Air Conditioner; Operating Instructions; Cooling Operation - Nordyne P6SD Series User's Manual & Installation Instructions

SAFETY INFORMATION
IMPORTANT: Please r ead allinstructions before servicing
thisequipment. Payattention toallsafetywarnings a nd
anyotherspecial n otes highlighted i nthemanual. Safety
markings a reusedfrequently t hroughout thismanual to
designate a degree orlevel o fseriousness andshould not
beignored. WARNING indicates a potentially h azardous
situation t hatifnotavoided, could result i npersonal injury
or death.CAUTION indicates a potentially h azardous
situation t hatifnotavoided, may result i nminor o rmoderate
injuryor property damage.
ABOUT THE AIR CONDITIONER
The P6 Series single packaged convertible air conditioner
is a high efficient self contained cooling unit that will cool
your home year round and provide energy saving comfort.
Additional features and benefits of the P6 air conditioner
include:
• Indoor and outdoor coils are designed to optimize heat
transfer, minimize size and cost, and increase durability
and reliability.
• Environmentally friendly R-410A Refrigerant.
Fan System Temperature
Mode Mode Selector
Figure 1. Digital Thermostat
The continuous indoor blower operation can be obtained
with the thermostat system mode set in any position,
including OFR
AIR CONDITIONER MAINTENANCE
Proper maintenance is most important to achieve the best
performance from the appliance and should be performed
frequently at the beginning of each air conditioning season.
OPERATING INSTRUCTIONS
Cooling Operation
1. Set the thermostat's system mode to COOL or AUTO
and change the fan mode to AUTO. See Figure 1.
2. Set the temperature selector to the desired
temperature level. The outdoor fan, compressor, and
blower motor will all cycle on and off to maintain the
indoor temperature at the desired cooling level.
Heating Operation
(If optional heat accessory is installed)
1. Set the thermostat's system mode to HEAT or AUTO
and change the fan mode to AUTO. See Figure 1.
2. Set thetemperature selector to a desired temperature
level. The indoor blower will cycle on and off to maintain
the indoor temperature at the desired heating level.
Turning the Air Conditioner OFF
Change the thermostat's system mode to OFF and the fan
mode to AUTO (See Figure 1). NOTE: The system will not
operate, regardless of the temperature selector setting.
Operating the Indoor Blower Continuously
The continuous indoor blower operation is typically used to
circulate t he indoorair to equalize atemperature unbalance
due to a sun load, cooking, or fireplace operation.
Set the thermostat fan mode to ON (Figure 1). The indoor
blower starts immediately, and will run continually until
the fan mode is reset to AUTO.
WARNING:
Your Air Conditioner contains liquid and gaseous
refrigerant under pressure. Installation and
servicing should only be attempted by qualified,
trained personnel thoroughly familiar with the
equipment and safe responsible refrigerant
handling procedures. Failure to comply with
this warning could result in equipment damage,
personal injury, or death.
• Keep the outdoor unit clean. Hose off periodically and
keep unit fins clear of leaves and grass clippings.
• Keep the outdoor unit clear of obstructions.
DO NOT obstruct airflow with tall plants or shrubs. DO
NOT store gasoline or other flammable materials on
or near the outdoor unit.
• Never operate the appliance without a filter installed in
the return air duct. Inspect filters frequently and replace
when necessary with filter of same dimensional size.
Before You Call a Technician:
• Check the thermostat setting. Make sure the system
mode and temperature settings are correct.
• Check the electrical panel for tripped circuit breakers.
• Check the filters for dust accumulation.
• Check the outdoor unit and make sure it is clean and
not covered with grass or leaves.