Safety Labels; Chute Clean-Out Tool - Craftsman 247.88190 Operator's Manual

1.KEEPAWAYFROMROTATING IMPELLER
ANDAUGER.CONTACT WITHIMPELLER O R
AUGER CAN AMPUTATE HANDS ANDFEET,
2. USECLEAN-OUT T OOLTO UNCLOG
DISCHARGE C HUTE.
3. DISENGAGE CLUTCH LEVERS, STOP ENGINE,
ANDREMAIN BEHIND HANDLES U NTILALL
MOVINGPARTS HAVESTOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE,
4. TO AVOIDTHROWNOBJECTS INJURIES,
NEVER DIRECT D ISCHARGE ATBYSTANDERS.
USEEXTRA CAUTION W HEN OPERATING ON
GRAVEL SURFACES.
5. READOPERATOR'SMANUAL.
_LEAN-OUT TOOL __
This symbol points out
importantsafety instructions
which, if not followed,could
endangerthe personal safety
and/or property of yourself
and others. Read and follow
all instructionsin this manual
beforeattemptingto operate
this machine.Failureto com-
ply with these instructions
may result in personalinjury.
When you see this symbol.
HEED ITS WARNING!
Your ResponsibUity
Restrict the use of this
power machine to persons
who read, understandand
follow the warnings and
instructions in this manual
and on the machine.
A chute c(ean=outtoo( is fastenedto the top of the
augerhousingwith a mountingclip, The too)is designed
to cleara chute assemblyof ice and snow,
This item is fastenedwith a cable tie at the factory,Cut
the cabletie beforeoperatingthe snowthrower,
_ ARNING:
Never use your
hands to c(ear a c)ogged chute
assemMy. Shut off engine and
remain behind bandies untiJ
all moving parts have stopped
before using the clean-out tool
to clear the chute assembly.
3