Operation Of Pip And Pop - Mitsubishi Electric WD-52628 Owner's Manual

Operation of PIP and POP

You can display programs from analog channels, analog inputs, or analog devices as picture-in-picture (PIP) and
picture-outside-picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on
ANT-1 and displays them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture
but cannot be the sub-picture. PC screens can be viewed as the main picture with PIP.
Press PIP/POP to activate the PIP/POP option. With
each press of the PIP/POP button on the TV remote
control, (within seconds of each press), the PIP/POP
cycles through the following display options:
MAIN
Side-by-Side
PICTURE
MAIN
PICTURE
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
To turn PIP/POP off, wait at least 10 seconds and then
press PIP/POP. The next time you activate PIP/POP, the
last-used PIP/POP option will be displayed.
Changing PIP/POP Device
When PIP is displayed, press PIP DEVICE to change the
PIP picture source device. A menu similar to the Device
Selection menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through memorized
channels on ANT-1 and ANT-2.
86
Chapter 6. Additional Features
Side-by-side
pictures
(Not available
when PC is
source)
3 POP
(Not available
POP 1
when PC is
source)
POP 2
POP 3
PIP
PIP Ant-1 17
(PC as main
picture only)
PIP
PIP off
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/
POP picture. Pictures from digital channels can only be
shown as the main picture. PC images can only be the
main picture. If you press EXCH while viewing images
from a PC, the TV exchanges audio with the PIP but
leaves the main image in place.
Moving a PIP Image
If no menus are on screen, press ADJUST
to move the PIP display anywhere on the main screen.
When the main picture is from a PC, the PIP can be
moved through four designated positions.
Automatic POP Switching
When automatic POP switching is active, the TV cycles
through memorized analog channels on Ant-1 or Ant-2 or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic POP
switching.
Selecting POP "Live" Image
Press ADJUST
image (automatic POP switching must be paused.)
Freezing the PIP and Side-by-Side
Pictures
Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a "live" image.
IMPORTANT
• The side-by-side option cannot show the
same channel or device on both sides.
• If ANT-1 or ANT-2 is the main picture,
ANT-2 is not available as a PIP, POP, or
side-by-side image.
• PIP/POP is not compatible with signals
from memory cards.
• You can view only one HDMI input at a
time with the PIP/POP or side-by-side
feature.
, , , or
to select a different POP "live"