Mitsubishi VS-5075 Owner's Manual page 70

The"Speaker"functionallowsyouto select h owthe Projection
TV'sspeakers w ill beused.
• Choose " Internal" if youwanttoplaytheProjection TV'ssound
throughthe its built-in speakers.
• Choose " Internal
Center Channel" :if you connecLed your TV
to a surround sound processor and you want to use the TV_s
built-in speakers as center channel speakers.
• Choose "External" if you connected speakers to the speaker
terminals on the rear of the TV, or if you want to play the sound
of your TV through an audio system.
The "Monitor out" function determines :how the TV will send an
audio signal to an audio system or home theater receiver. Your
choices are "Variable" or "Fixed."
• If you choose "Fixed," the TV will send out an audio signal at a
fixed volume level. The level will not c, h ange when you adjust
the TV_s volume. Use the controls on your audio system to
adjust the volume. The "Fixed" settiing is most useful when you
can control the audio system's volume with a remoLe control.
• If you choose "Variable," the TV's audio output will change
when you change the TV's volume. :[f you use this setting with
an audio system, turn the TY's volume all the way down, set the
audio system's volume to an average setting, then turn the TV_s
volume up until you can hear the signal.
ADJUST
J
1
00©_ o
adjustillg the audio functions
When adjusting the audio
functions, you can use the buttons
on the remote control or on the
control panel.
O
Press the AUDIO button
repeatedly until the function
you want to adjust appears
on-screen. (The functions
appear at the center of the
bottom of the screen.)
While the function is still on the
screen, use the ADJUST
buttons to adjust its setting.
O
The fanctions will disappear
from the screen afLer a few
seconds. (You cannot adjust a
function if it is not on the
screen.)
Getting Started 71