Adjusting The Sound - Mitsubishi VS-5075 Owner's Manual

Adjusting the sound
Your TV allows you to customize and adjust the settings of its
audio functions. This section give,; you descriptions of each audio
function, then explains how to adjust the functions.
descriptions of audio functions
The "Listen to" function allows you to determine how your TV will
receive an audio signal and play back the sound that you hear. You
can set this function to "Stereo," "S.A.P.," and "Mono."
• For almost all situations, you should choose "Stereo." With this
setting, the TV will play stereo broadcasts in stereo and mono
broadcasts in mono. If a channel :is broadcasting in stereo, the
word "Stereo" trill be displayed when you tune to that channel.
• Some TV stations will broadcast a separate audio programming,
or S.A.P., signal. This signal is an additional soundtrack that
you can't hear during normal TV viewing. An S.A.P. signal
might be related to the program you are watching (e.g., a
soundtrack in a foreign langyuage), or it might be unrelated (e.g.,
a weather report). If a channel is broadcasting an S.A.P. signal,
the letters "SAP" will appear on-screen when you tune to that
channel. Choose "Listen to:'. SAP" to hear Lhe S.A.P. signal.
• Use the "Mono" setting if you are receiving a weak audio
signal. This setting will reduce background noise. However,
with this setting, the TV will only play in mono, even if the
program you are watching is in stereo.
The "Bass" function controls the volume of low frequency sound.
The "Treble" function controls the volume of high frequency sound
The "Balance" function adjusts the level of sound between the left
and right speakers. Adjust the scale until the :sound seems to come
equally from both speakers.
The "Surround" function create,; simulated stereo and surround
effects. You can set this function to "Off," "Simulate," or "Hall."
• Select "Off' if you do not want to use any surround effects.
• Select "Simulate" if are watdhing a non-stereo program; your
Projection TV will create a ,_imulated stereo effect.
• Select "Hall" if you are watching a stereo program; your Projec-
tion TV will create a simulated surround effect., making the
sound seem to ,extend around and behind you.
70 Chapter 3: Operating Your Projection TV