Using The Active A/V Network Feature - Mitsubishi VS-5075 Owner's Manual

_Important:
Important:
using the PLAY button (AUTO PLAY)
When you press PLAY on the remote:
• Active A/V Network will turn your VCR on and begin playing
the tape (if any).
• Active A/V Network will turn your TV oi1 and switch it to
INPUT-1.
When you turn your Projection TV off:
• If your TV has been set to "Active," your VCR will turn off,
unless it is playing or recording.
If you leave the Projection TV turned on and:
- it is set to Input-l, and
- it does not receive a signal for five minutes, and
- you do not use the menus for five minutes, then:
the TV will automatically turn off:
If you turn the Projection TV off while it is set to Input-:[, it will
return its previous antenna and channel setting when you turn it
back on.
Using the Active A/V Network Feature 103