Mitsubishi VS-5075 Owner's Manual page 104

Problems
Possible Solutions For More Information
On-screen displays appear
each time you adjust a
function.
• This is part of the normal
operation of the TV.
See "Understanding the On-
Screen Displays" in Chapter
4 for a full explanation of
the on-screen displays.
There's no sound even when
the volume is turned up.
Check that the MUTE
button isn't on.
The TXPs "Listen to:" setting
may be set to "separate
audio program" (S.A.P.).
See "Remote control buttons
and functions" in Chapter 1,
which explains the location
and function of the MUTE
button.
See "Adjusting the sound" in
Chapter 3, which euplains
how to adjust the ":Listen to"
setting.
• You forget the code you used
to set the parental lock.
• Use the alternate procedure
that doesn't require the use
of the code.
• See the Appendix,
"Procedure for Bypassing
the Parental Lock."
You can't program the
Projection TV to turn on
automatically.
The Projection TV may be
locked.
See "Using the parental
lock" under "Using the
Ad_ranced Features" in
Chapter 3.
The sound doesn't match the
image on screen.
• The TV's "Listen to:" setting
may be set to "separate
audio program" (S.A.P.).
• You may have "swapped"
the sound with the PIP
image.
See "Adjusting the sound" in
Chapter 3, which explains
how to adjust the "Listen to"
set'_ing.
• See "Using the Advanced
Picture-in-Picture (PIP)
Modes" on page 9_;.
There is a large black
rectangle on the screen.
The TV has been set to
"text" mode, but there is no
text information being
broadcast.
See "Using the closed
caption decoder" under
"Getting started" in
Chapter 3.
Troubleshooting 107