Mitsubishi VS-5075 Owner's Manual page 53

Changing channels
Important:
_Important:
Your Projection TV offers you four ways, of changing channels once
their numbers have been programmed into channel memory:
• selecting channels one-by-one with the channel controls,
° directly accessing a channel by pres,dr_Lg the number buttons,
• using the special Quick View option to switch to a particular
memorized channel, and
• using the Super Quick View function to alternate between
channels on a user-chosen list.
To change channels faster, use either of the following procedures:
• Enter three digits for every channel number, using zeros where
needed. (For example, enter "004" to _:[ew channel z.L and "028"
to view channel 28.)
• Press the ENTER button after selecting the number of the
channel. (For example, :press "4" and ":ENTER" to _[ew
channel 4.)
Cable channel numbers 0 and greater than 126 are not used.
TV stations 0, 1, and 70 through 999 are not used. If you select one
of these channel numbers, :your Projectior.L TV will not ,change
channels.
54 Chapter 3: Operating Your Projection TV