Mitsubishi VS-5075 Owner's Manual page 52

Selecting the input source
If you connected components such as VCRs, camcorders, or laserdisc
players to your Projection TV, you will need to change the input source
to view the signals from these components.
To select an input source, press the input button (INPUT) on the
control panel or on the remote control.
ot.m
©
o
©©©©©©©
You can choose between the following input sources:
• Ant-A or Ant-B (antennas or cable systems connected to the
antenna terminals),
• Input-1 or Input-2 (components connected to the terminals on
the back of your television), or
• Input-3 (a component connected to the terminals on the front of
the television).
The name of the input you have selected _m]l be displayed briefly in
the corner of the screen.
Getting Started 53