Mitsubishi VS-5075 Owner's Manual page 27

Projection TV + external speakers
equipment you will need
To complete this hook-up, you will
need:
• one set of speaker lead wires.
Tab (Push Here)
ExternalSpeaker O
Lead Wires
@
Projection TV Rear Terminals
procedure
0 Make sure the Projection TV is unplugged.
Connect the speaker wires to the external speakers.
O
Push down on the tab of the external ,_peaker (EXT SP)
terminal on the back panel of the Projection TV. Insert the
appropriate speaker lead into the terminal. Be sure that the
+ and - leads from the speakers are con:aected to the matching
+ (red) and - (black) external speaker terminals.
To listen to external speakers, set the speakers to "External"
with the on-screen audio functions. (Please see pages 70 - 71.)
• Warning: I Never connect equipment other than speakers to the external
speaker terminals.
WRONG
TV St:maker A_nplifier
RIGHT _v
Speaker
Anlplifier Speaker
If you wish to connect the TV to an
amplifier, use only the method shown in
"Projection TV + audio system."
You should make this connection in addition to one of the other
connections in this chapter, not in place of other connections.
Basic Connections 27