Mitsubishi VS-5075 Owner's Manual page 64

adjusting the alignment
@
If the test screen shows a single, solid white cross, the Projec-
tion TV_s tubes are aligned correctly. Skip to step O. If you see
three crosses, or if the single cross has discoloration at its
edges, go to step O.
O When you first display the "test" screen, the word "Red" ap-
pears at the top of the screen. This indicates that you will be
adjusting the red cross on the screen.
Adjust the position of the red cross until it is perfectly aligned
with the green cross at the center of the screen. To adjust the
red cross, use the ADJUST buttons on the remote, or the
ADJUST, VIDEO, and AUDIO buttons on the control panel.
O When you've finished adjusting the red cross, press ENTER.
The word "Blue" will appear at the top of the screen.
O
Adjust the position of the blue cross until it is perfectly aligned
with the green and red crosses at the center of the screen. You
can use the ADJUST buttons on the remote, or t:he ADJUST,
VIDEO, and AUDIO buttons on t:he control panel.
O When all three crosses are perfectly aligned, they should
appear as a single, solid white cross.
O To remove the "test" screen from the Projection TV, press the
HOME button on the remote, or the ENTER and ADJUST-
down buttons on the control panel.
Getting Started 65