Installation; Tools And Parts - Maytag MTW6400TQ0 Use & Care Manual

Hide thumbs Also See for MTW6400TQ0:
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT
SAFETY
INSTRUCTIONS
WARNING:
To reduce the risk of fire, electric shock, or injury to persons when using the washer follow basic precautions,
including the following:
• Read all instructions before using the washer.
• Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
• Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE.
If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated
hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
• Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
• Before the washer is removed from service or discarded,
remove the door or lid.
• Do not reach into the washer if the drum, tub or agitator is
moving.
• Do not install or store the washer where it will be exposed to
the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended
in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
• See "Electrical Requirements" for grounding instructions.
this time.
SAVE THESE
INSTRUCTIONS
INSTALLATION
REQUIREMENTS
Gather
the required
tools and parts before starting installation.
The parts supplied
are in the
washer
basket.
Tools
needed
for connecting
the drain
hose and water
inlet
hoses:
Pliers that open to 1%6" (3.95 cm/
Flashlight
(optional)
NOTE:
Replace inlet hoses after ,5 years of use to reduce the risk of hose failure.
Record
hose
installation
or replacement
dates for future reference.
Parts supplied:
B
C
A. Drain hose form
B. Water inlet hoses (2)
C. Hat water
inlet hose washers
(4)
D. Bea(£'d
tie strap
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtw6300tq0Mtw6300tq1Mtw6500tq0

Table of Contents