Advertisement
Available languages
Available languages
REMOVE PACKING
MATERIALS:
Remove materials, tape and labels
before using the freezer.
Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive
cleaners. These can damage the freezer.
Clean your freezer before using it:
1. Use a sponge, cloth or paper towel
and mild detergent in warm water to
clean outside and inside of freezer,
door liner and gasket.
2. Rinse and dry thoroughly.
CHOOSE FREEZER
LOCATION:
1. Locate the freezer in a safe place,
indoors, away from direct sunlight or
heat sources such as a range, dish-
washer, laundry
equipment,
heat
vents or radiator.
2. DO NOT store flammables such as
gasoline near the freezer.
3. Check the strength of the floor. It
should hold the weight of a fully
loaded freezer.
4. Allow at least 3" (7.5 cm) on all sides
to allow for proper air circulation
around the freezer.
5. If the freezer is to be against a wall,
leave extra space on the hinge side so
the lid can be opened wider.
6. If the location selected for your freezer
is damp or moist, as in some base-
ments, place freezer on wooden
blocks (at least 2 or 3 boards under
the entire length of the freezer are
needed for adequate support).
7. The freezer must be level for proper
operation.
8. DO NOT install the freezer on a
carpeted floor.
9. This freezer is designed to operate
at a household temperature of 40° to
90° F (4° to 32° C).
Advertisement
