Table of Contents
Advertisement
OneTouch Recording 2 7
The one touch recording (OTR) function allowsyou to set an
immediate timed recording 30 minutes to eight hours long without
setting the timer. Before you begin,make sure:
•
Channels are programmed.
• The desired recording speed (SP,LP,SLP) has been selected
with the (Tape)SPEEDbutton. (Details are on pages30 and 48.)
• There is a tape in theVCR. Make sure the tape's record tab is
intact and the tape is long enough to record the program(s).
• TheVCR light appears on the display panel of theVCR. (If it
does not, press the VCRFI-V button once.)
Starting
an OTR
I
Use the CHANNEL
(Up/Down)
buttons or the Number
buttons to select the channel you want to record.
2
Press the REC(ord)/OTR
button
repeatedly
until the desired
recording length (30 minutes to eight hours) appears in the upper
left corner of the screen. Recording will begin immediately.
3
To stop an OTR before
recording
is finished, press the
STOP
button
or the POWER
button. To cancel the OTR but
continue recording, press the REC(ord)/OTR
button until REC
appears in the upper left corner of the screen.
2
PHILIPS
J
!
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the
desired length appears on-screen.
• If you begin an OTR when a record-
ing is paused, the OTR will begin.
• Youcan not pause recording (for
example, during commercials) dur-
ing an OTR.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.
• If the end of the tape is reached
during an OTR, recording will stop.
The VCR will eject the tape, then
turn itself off.
Advertisement
Table of Contents
