Table of Contents
Advertisement
A
DVANCED
Rec(ord) End Search
This function enables you to search forward to
the next unrecorded portion of the tape (or to the
point at which recording was stopped).
1 Press the REC END SEARCH button. The
VCR begins fast forwarding or rewinding to
find the blank portion or the recording end
portion on the tape. SEARCHING FOR REC
END will appear on the screen during the
search.
2 The VCR automatically stops when the blank
portion or the recording end portion is reached.
REC END SEARCH COMPLETED will
appear on the screen briefly.
The tape remaining tape time also appears on
the display panel.
Child Lock
You can prevent the VCR operations.
To use Child Lock
When the VCR is turned on, press and hold
POWER f on the remote control for more than
10 seconds to turn off the VCR.
The "CL" appears blinking on the display.
While "CL" is on the display, you cannot turn
on the VCR by pressing POWER f on the front
panel.
To cancel Child Lock
Press and hold POWER f on the remote control
for more than 10 seconds to turn on the VCR.
The "CL" disappears on the display and VCR is
turned on.
You can also cancel the child lock function by
unplugging the AC power cord.
One Touch Recording (OTR)
The OTR function lets you quickly specify how
long you want a recording to continue. You do
not have to programme the timer.
1
On TV
1 Turn on the TV.
2 Select the video channel (or AV mode).
2
On VCR
Insert a cassette with the record tab in place.
The VCR turns on.
• If a cassette is already in the VCR, turn on the VCR.
220/75
O
PERATIONS
3
Press CH
channel to record.
4
Press REC/OTR q twice.
Recording starts immediately, and the
(Record) indicator lights up and blinks on the
display.
This indicates that the VCR will
automatically shut off after 30
minutes of recording.
5
Press REC/OTR q repeatedly until the desired
recording length appears.
Each time you press the button, recording length
increases in 30-minute intervals.
To check time remaining during an OTR
Press OK/STATUS.
To change the recording length during an
OTR
Press REC/OTR q repeatedly until the desired
length appears.
To cancel an OTR
Press STOP
recording length is reached.
If you want to cancel the OTR mode but continue
recording, press REC/OTR q several times
until "OTR" changes to "REC" on the TV screen.
Notes on the indications on the display while an OTR
operation
• During recording, the displayed time counts down.
• If an OTR is engaged during pause, the displayed
—13 —
13
Select Channel
5
∞
/
or Number buttons to select the
Start OTR
Select Recording Length
=
=
=
0:30
1:00
1:30..... 5:30
REC (Normal recording)
7
to stop recording before the preset
When "0:00" is reached, recording stops and the VCR
turns off automatically.
time counts down normally, but recording does not
begin until you cancel the pause.
01.5.11, 4:16 PM
OTR(0:30)
CH12
SP
=
6:00
+ + + + +
Advertisement
Table of Contents
