One Touch Recording (Otr); Index Search.15; Automatic Operations - Philips VR388/55 Instructions For Use Manual

One Touch Recording (OTR)
^ Select Recordina Lenath
Index Search
The OTR function lets you quickly
specify how long you want a recording
to continue. You do not have to
programme the timer.
Press REC/OTR • repeatedly until the
desired recording length appears.
Each time you press the button, '
recording length increases in 30-
minute intervals.
You can locate an index marked at the
beginning of each recording on a tape
recorded on this VCR (or an indexed
tape).
Make sure....
• The record tab on the cassette is not
removed.
• Your VCR, TV, and antenna are
connected correctly.
• The remote control operation mode
is set correctly for operating your
target component.
- Press VCR to operate the VCR.
- Press TV to operate the TV.
ForVR588/55:
p0:30-^1:00-^1:30.8:30-^9:00-1
'-REC (Normal recording)^-J
ForVR388/55:
p0:30-^1:00-^1:30 4:30-^5:00-1
*-REC (Normal recording)^^—^—•
Press INDEX ►W or INDEX KM
repeatedly until the appropriate number
is displayed on the TV screea before
starting play. Rapid forward or reverse
search begins.When it finds the
designated index, playback starts
automatically.
• Locate an index number by pressing the
button repeatedly, indicating how many
index marks ahead of or behind that
U On TV__
1 Turn on the TV.
2 Select the video channel (or external
video input).
2 On VCR_
Insert a cassette with the record tab in
place.
The VCR turns on.
• If a cassette is already in the VCR, turn
on the VCR.
To rewind the tape, press REW ◄◄.
Select Channel__
Press CH
A
/
T
or Number buttons to
select the channel to record.
k; Start OTR_.
Press REC/OTR • twice.
Recording starts immediately, and the
• (Record) indicator lights up on the
display.
This indicates that the
VCR will
automatically shut off
after 30 minutes of
recording.
OTRiOiO)
_1 CH12
ep
To check time remaining
during an OTR
Press EXIT/STATUS.
To change the recording
length during an OTR
Press REC/OTR • until the desired
length appears.
To cancel an OTR
Press STOP ■ to stop recording before
the preset recording lengthds reached.
If you want to cancel the OTR mode
but continue recording, press REC/
OTR • several times until "OTR"
changes to "REC" on the TV screen.
Notes on the indications on the display
while an OTR operation
•
During recording, the displayed time
counts down. When *'0:00** is reached,
recording stops and the VCR turns off
automatically.
•
If an OTR is engaged during pause, the
displayed time counts down nonnally, but
recording does not begin until you cancel
the pause.
recording you want is from the tape's
current position.
• Up to ±9th index mark from the current
position on the tape can be located.
Automatic Operations
Auto playback
When a tape is inserted, the VCR turns
on. If the record tab is removed,,
playback begins.
Repeat playback
When you press and hold PLAY ► for
more than 5 seconds, you can play back
the same tape repeatedly (50 times).
When the tape ruri^ to its end, the VCR
automatically rewinds the tape, and
starts playback.
Auto rewind
When a tape reaches its end during
playback, fast forwarding, or manual
recording, the VCR rewinds the tape
and stops.
Memory rewind power off
When you press POWER during
rewinding, the VCR turns off after
rewinding is completed.
Eject cassette
You can eject the tape simply by
pressing EJECT ^ even while the
VCR is turned off.
When you press EJECT A, the VCR
automatically turns on, ejects the tape,
then turns off.
15