44Hi-Fi S tereo S ound S ystem
MTS broadcasts are automaticallyrecorded in Hi-Fi stereo sound.
To play in Hi-Fi stereo tapes recorded in Hi-Fi stereo, however,
you'll need to follow the steps below.
I
Press the MENU button to bring up the main menu display.
2
Press the Number
2 button
to selectVCR
SET UP.
REPEAT PLAY
OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
VCE
PLUS+
P.EF. MAP
END
PUSH
EXIT
3
Press the Number
3 button
to select AUDIO
OUT.
o1
END PUSH EXIT
4
Press the Number
I button
to select HIFI. ON will appear to
the right of HIFI on-screen.
END PUSH EXIT
5
Press the STATUSIEXIT
button
to exit
!
2
PHILIPS
• All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
• The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded in
Hi-Fi stereo.
• Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But, you
can change the selection to MONO
if you want monaural audio play-
back. To do this, follow steps I - 3
above. At step 4, press the Number
2 button. Press the STATUS/EXIT
button to exit. HIFI will disappear
from the status display.
• If you play non-Hi-Fi tapes while the
VCR is set to Hill, HIFI will disap-
pear from the status display and the
tape will play in monaural sol
Please see additional
no.
on page 47.