Using On-Screen Display; One Touch Recording (Otr) - Philips VR1200/02 User Manual

S
A
D V A N C E D D V A N C E D
D V A N C E D

Using On-Screen Display

You can display the VCR operating status on the
TV screen.
For the information about what you can see on
the TV screen, see page 4.
1 Press VCR.
2 Press MENU.
3 Press 5 or ∞ to select "VCR SET UP" then
press OK/STATUS.
The VCR Set Up menu appears.
DSPC
\ O. S. D.
DIRECT REC
AUTO SP=LP TIMER
POWER SAVE
AUTO SAT
RECORD LINK
VIDEO STABILIZER
NEXT PAGE
SELECT : 5∞
CHANGE : >
END : MENU
4 Press 5 or ∞ to select "O.S.D."
5 Press 3.
Each time you press the button, the setting
changes as follows:
ON: The VCR operating status appears on
screen (The default setting is "ON").
OFF: The VCR operating status does not
appear on screen.
6 Press MENU.
Notes:
• When you use this VCR as the player for
tape duplication, be sure to set "O.S.D." to
"OFF" before starting.
• During playback, the operation mode
indicators may be disturbed depending on
the type of tape being used.
O
P E R A T I O N S P E R A T I O N S
P E R A T I O N S
ON
ON
ON
OFF
OFF
OFF
OFF

One Touch Recording (OTR)

The OTR function lets you quickly specify how
long you want a recording to continue. You do
not have to programme the timer.
Make sure....
• The record tab on the cassette is not removed.
• Your VCR, TV and antenna are connected
correctly.
1 Turn on the TV.
2 Set the TV to AV mode.
3 Insert a cassette with the record tab in place.
The VCR turns on.
• If a cassette is already in the VCR, turn on
the VCR.
4 Press CH 5 or ∞ or NUMBER buttons (or
PROGRAMME 5/∞ on the front panel) to
select the channel position to record.
5 Press REC/OTR ¶ twice.
Recording starts immediately, and the
(Record) indicator lights up and blinks on the
display.
6 Press REC/OTR ¶ repeatedly until the
desired recording length appears.
Each time you press the button, the recording
length increases in 30-minute intervals.
=0:30=1:00=1:30 ... 5:30=6:00
REC (Normal recording)+
To change the recording length during an
OTR
Press REC/OTR ¶ until the desired length
appears.
To cancel an OTR
Press STOP 7 to stop recording before the
preset recording length is reached.
If you want to cancel the OTR mode but continue
recording, press REC/OTR ¶ several times until
(Record) indicator stops blinking.
Notes on the indications on the display
during an OTR operation
• During recording, the displayed time counts
down. When "0:00" is reached, recording
stops and the VCR turns off automatically.
• If an OTR is engaged during pause, the
displayed time counts down normally, but
recording does not begin until you cancel the
pause.
— —
36
( C ( C ) )
( C )
O N T I N U E D O N T I N U E D
O N T I N U E D
+ + + +