Table of Contents
Advertisement
Recording 25
Readand follow the steps below to record a television program.
I
Turn the TV on and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of theVCR is set to.
2
Insert a tape with its record
tab intact
(see page five) in the
VCR.The power will come on, and the Cassette-Inside
light will
appear.
3
If the VCR light appears on the display panel of the VCR, go to step
4. If theVCR
light does not appear, press theVCR/TV
but-
ton once,
4
Press the (Tape) SPEED button on the remote control until
the desired tape speed (see pages 30 and 48 for details) appears
on the TV screen.The tape speed will disappear from the screen
after about five seconds.
5
Press the CHANNEL
(Up/Down)
buttons
or the Number
buttons
to select the channel to be recorded.
6
Press the REC(ord)/OTR
button
once to start recording.The
REC light will appear on the VCR's display panel.
If the REC(ord)/OTR
button is pressed when there is not a tape in
theVCR, NO CASSETTE will flash on-screen.
Turn on the TV.
Insert a tape in the VCR.
4
6
PHILIPS
J
7
To pause the recording
(for example,
during commer-
cials), press the PAUSE/STILL
button
on the remote control
or the PAUSE button on theVCR
once.The
REC light will flash. To
start
recording
again, press the REC(ord)IOTR
button
or
the PAUSE/STILL
button
again. The REC light will come on
again.
8
To stop recording,
press the STOP
button
on the remote
control.
• If the REC(ord)IOTR button is
pressed while a tape without a
record tab is in the VCR, the VCR will
eject the tape and PROTECTED
CASSETTECANNOT RECORD will
flash on-screen.
• Other recording options are on
pages 26-36.
• Youcan change the tape speed
while the VCR is recording, but some
distortion will appear on the tape.
• The VCR wilt record in a preset VOI-
LIITle.
Advertisement
Table of Contents
