Remote Control Buttons - Philips VRX262AT Owner's Manual

Remote C ontrol Buttons (cont'd) 1 9
VCR/TV Button
Use to select the signal that yourTV receives.
• VCR Position
Use to watch a tape, to watch a program while recording it, or
to watch a'lV broadcast using the CHANNEL (Up/Down) or
Number buttons. When the VCR light appears on the VCR dis-
play panel, you are in VCR position.
• TV Position
Use to watch "IV or to watch one program while recording
another. Details are on page 26.
CHANNEL (UplDown) Buttons
Press to scan up or down through the VCR's channels after the
channels have been programmed.
TIME SEARCH Button--- 1
Press to fast forward or rewind the tape a specific length of time.|
Details are on page 38.
FoFWD Button
When in Stop mode, press to fast forward the tape at high speed.
When in Play mode, press to fast forward while the picture stays
on-screen.
STOP Button
Pressto stop the tape.
CLEAR Button
Press to erase incorrect data when programmingVCR functions,
such as setting the clock; press to clear a timer recording; or press
to reset the real time counter.
MEMORY Button
Press to memorize a tape position at which the real time counter
was set to 0:00:00. Details are on page 39.
PAUSE/STILL Button
In Record mode, press to temporarily stop the recording (pause).
Press a second time to resume recording. Details are on page 25.
You can not pause a one touch recording that is set for a specific
length of time.
In Play mode, press to freeze the picture (still). Press a second
time to resume normal playback. Details are on page 40.
SLOW Button
During tape playback, press to view the picture in slow motion.
Press again to resume normal playback. Details are on page 40.
r
PHILIPS ,..._<:_.__:4