Before Usingyour Vcr - Philips VRX262AT Owner's Manual

Before U sing Y our VCR5
Putting Batteries in the Remote Control
Remove the battery compartment lid on the bottom of the
remote control by sliding it in the direction of the arrow.
2
Insert two AA batteries inside the battery compartment with
their polarities (+ and - ends) aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
• Point the remote control at the VCR's remote sensor (see page
22) when using the remote control to operate theVCR.
• Do not put objects between the remote control and theVCR.
Erasure Prevention
Video cassettetapes have record tabs to ensure that recordings
are not accidentally erased.
I
To prevent accidentalerasure, break off the tab with a screwdriver.
2
To record again,cover the hole with cellophanetape.
VCR maintenance
• In thisVCR, use only tapes with the IVl_mark.
• Make sure any lightadhesive stick-on notes are removed from
the video cassette tape before putting the tape in theVCR.
Removable labels like these can jam the VCR.
• Periodic maintenance is required to maintain yourVCR's con-
tinued excellent performance.The video headswill eventually
require cleaningor replacement Cleaning or replacement of
the video headsshould be performed by an authorized service
center.
• The remote control and its batteries
are supplied.
• Do not mix alkaline and man-
ganese batteries.
• Do not mix old and new batteries.