Table of Contents
Advertisement
24 Playing
Readand follow the steps below to play a tape.
I
Turn on the TV.
Turn the'IV
on and set it to channel
3 or 4, whichever the
_IE
CH3/CH4
switch on the back of theVCR
is set to.
L
2
Insert a tape in theVCR.The
power will come on.TheVCR
will place itself in VCR position automatically (theVCR
light and
the Cassette-Inside
light on the display panel of the VCR will
appear). If the tape's record tab has been removed, playback will
start automatically.
3
If playback
does not start
automatically,
press the PLAY
button
to start playback.
4
Press the STOP button on the remote control or the
STOPIEJECT button on theVCR once to stop playback.
5
Press the REW(ind)
button
on the remote control or the
REW(ind) button on theVCR
to rewind the tape.
6
When
playback
is stopped,
press the EJECT button
on the
remote
control
or the STOP/EJECT
button
on theVCR
again to remove the tape.
5
Insert a tape in theVCR.
PHILIPS
J
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR light
is on, then press the PLAYbutton.
• Other playback options and fea- _
tures are on pages 37-4 I.
Advertisement
Table of Contents
