KitchenAid KESC300 Use And Care Manual page 47

ng
This section is designed to help you save the cost of a service call. It outlines possible
problems, their causes, and actions you can take to solve each problem. If you still need
assistance or service, call our Consumer Assistance Center (in the U.S.A., see page 50; in
Canada, see page 51 ) for help or calling for service. Please provide a detailed description of
the problem, your appliance's complete model and serial numbers, and the purchase or
installation date. (See the "A Note to You" section.) This information will help us respond
properly to your request.
PROBLEM POSSIBLE CAUSE WHAT TO DO
Nothing will
operate
The oven will
not operate
The cooling fan
operates during
BAKE, BROIL,
or CLEAN
The unit is not wired into
a live circuit with proper
voltage.
A household fuse has blown
or a circuit breaker has
tripped.
You have not set the
electronic control correctly.
You have programmed a
delayed start time.
It is normal for the fan to run
while the oven is in use. This
cools the electronic control.
Wire the unit into a live circuit with
proper voltage. (See Installation
Instructions.)
Replace household fuse or reset
circuit breaker.
Refer to the section in this manual
describing the function you are
operating.
Wait for the start time to be reached
or cancel and reset the controls.
No action is required.
The surface
units will not
operate
The control
knob(s) will
not turn
A household fuse has blown
or a circuit breaker has
tripped.
You have not set the control
knobs correctly.
You are not pushing in
before turning.
Replace household fuse or reset
circuit breaker.
Push control knobs in before turning
to a setting.
Push control knob(s) in before
turning to a setting.
The Self-Clean- You have programmed a
ing cycle will delayed start time.
not operate
Wait for the start time to be reached
or cancel and reset the controls.
continued on next page
47