Stitch Length Control; Reverse Stitch Control - Kenmore 385.17124 Owner's Manual

Stitch Length Con&oR _ "_
(_ Stitch length setting display
The higher the number of stitch length control, the
longer the stitch. "0" means "no feed".
The stitch length control also has a stretch stitch
setting. To select a stretch stitch, set the control at
" _ STRETCH".
NOTE: When you select
a stitch (Red or Green)
or buttonhole (Blue), make sure that the
stitch length control is not set at
" _r STRETCH".
Study the Red, Green, Gold and Blue zones
on the stitch length control. These are
recommended zones of stitch length and are
color-coded to the stitches on the pattern
indicating panel.
LENGTH
¥--0=1-_-2--3--4
STRETCH
Stitch Width Oontroi
O Stitch width setting display
The higher the number of the stitch width control,
the wider the stitch.
The "#" is the adjustable range of twin needle stitch
width, and the blue zone is for buttonhole.
,,---_--m
0--1 --2--3=4=5=6
Adjusting Stretch Stitch Balance
If stretch stitch patterns are uneven when you sew
on a particular fabric, adjust them with the feed
balancing dial.
To adjust distorted patterns
[] If patterns are drawn out, correct by turning
the dial in the direction of "-"
[] If patterns are compressed, correct by
turning the dial in the direction of "+".
Reverse Stitch Control
f
Sewing will be made in reverse while the reverse
stitch control is pressed.
30