Stitch Selector - Kenmore 385.17124 Owner's Manual

Stitch
Selector
Sewing guide display
(_ Selected stitch indicator
(3) Stitch selector
Turn the stitch selector @ until the red indicator
reaches the desired stitch.
The bottom row of stitches on the pattern indicating
panel is selected when the stitch length control is
set at the stretch stitch position.
Recommended stitch width, stitch length and foot
are shown in the sewing guide display Q_.
When you turn the stitch selector _3_,the information
in the display (_ changes automatically.
Please use the color in the sewing guide display
which corresponds to the color of the selected
stitch.
NOTE: To avoid needle or fabric damage, make
sure the needle is up and out of the fabric
while selecting a stitch.
Stitch patterns are color-coded to a recommended
setting zone at the stitch length control.
ZONES:
Red:
Green:
Blue:
Gold:
Straight, zigzag and utility stitches
Gedmetric decorative Stitches
Built-in buttonhole
Stretch stitches
WIDTH
LENGTH
PRES,SER [_ FOOT
:i:
C:_Dr_3 O_:31:::31::31_DQDI_QI::3DIt_I
32