16.
Notes on Use of NEC Storage DynamicDataReplication
The following explains notes (state transition) if the event below occurs while Dynamic
Data Replication is used:
– A controller is replaced
– The holding of cache memory data by the battery backup unit in power-off state
exceeds the specified time.
Activity State
Separate
Replicate
Restore
Any pair in which a fault has occurred is recovered by the following operation:
1.
Issues Forced Separate in the RV target.
Executes the commands in the previous state again (Replicate → Separate or
2.
Restore).
The copy operation started again for the entire logic.
Sync State
Separated
Entire difference. No status change
Sep-SYNCING
Change to fault state and abort of copy operation
Rep-SYNCING
Entire difference. Replication retried automatically from
the first step. No status change
SYNCED
Res-SYNCING
Change to fault state and abort of copy operation
SYNCED
132
Pairing state