Table of Contents
Advertisement
19.
Program Products
To use the disk array unit, the following program product is required:
NEC Storage BaseProduct Ver 2.1 -NEC Storage2300
To use the disk array unit, release the license lock using the license code that is provided
with "NEC Storage BaseProduct Ver2.1 - NEC Storage2300."
A designated maintenance person is responsible for releasing the license lock of "NEC
Storage BaseProduct Ver2.1-NEC Storage2300" during the installation of the disk array
unit. Please give him the license code provided with the product.
For any other program product available for the disk array unit, ask your sales
representative.
20.
Updating of Control Software
The disk array unit may upgrade the version of storage control software when a function
or the like is additionally installed.
You can use the added function by updating the storage control software of which version
has been upgraded.
You can update the storage control software by yourself. However, if you fail to update it,
the disk array unit can no longer operate at the worst.
NEC maintenance service representative provides the installation service (additionally
charged) for updating the storage control software. It is strongly recommended that you
should ask your maintenance service representative who has technical knowledge to
update it.
Before the disk array unit can be used, the license lock must be released by
using the license code provided with NEC Storage BaseProduct.
Be sure to release the license lock. A disk array unit without the license lock
being released cannot receive any maintenance services because the
operation cannot be guaranteed.
134
Advertisement
Table of Contents
