NEC NF2300-SR412E User Manual page 13

Check of Components in Package
(1) Unpacking
Open the package and take out the disk array unit and accessories from the package
without large shock. The disk array unit is greatly heavy. Accordingly, if two people
or less lift the unit, their backs may be damaged. To take out the disk array unit from
the package, more than three people should always support the bottom of the unit
without holding the power supply on the rear face and the projections of the
controller.
The package is specially designed for carriage of a precision device. Do not dispose
of the package because it is required to return the disk array unit to the factory for its
repair.
(2) Inspection
After unpacking, check that all the components listed in the table below are
provided. If any of the components is missed, contact your sales agent. Next, inspect
the disk array unit and accessories. If any of the components is damaged, contact
your sales agent.
No. Product name
1 NEC Storage S2300 1/2
2 NEC Storage S2300 2/2
3 Disk drive
(Installed in NEC Storage S2300
2/2)
4 Power cord
5 HSSDC cable
6 DE diagnosis cable
7 Front mask
8 Key
9 User's Guide (this document)
10 Packing list
11 Location label
12 T&D program
13 Rack mount kit
* Use the FC cable (HSSDC) and DE diagnosis cable provided with the additional
disk enclosure or separately priced DE cable (NF9120-SJ04E) for connecting disk
array unit NEC Storage S2300 with the additional disk enclosure.
Remarks
NF2300-SR412E: 36 GB
NF2300-SR413E: 73 GB
NF2300-SR414E: 147 GB
NF2300-SR422E: 36 GB/15K
Length 5 m (for 100-120 VAC)
Length 1 m
Length 1 m
For NEC Storage S2300 1/2
For NEC Storage S2300 2/2
DAT cartridge for NX7000 system
For NEC Storage rack (L and R)
xi
Qty
1
1
3
3
3
3
4
2
2
1
1
2
1
1
1
1
2