Lan Card - NEC NF2300-SR412E User Manual

3.6

LAN Card

(3) READY LED
(7) UPS connectors
(1) SHUT DOWN switch (toggle switch)
Use this switch to turn off the disk array unit. Normally set this switch to OFF.
Turning on this switch starts writing the cache data remaining in the array controller
into disk drive.
To power off the disk array unit, see "7.2 Power On/Off of Disk Array Unit" for
details.
(2) SHUT DOWN LED (green)
The SHUT DOWN LED goes off while the LAN card operates normally.
The LED flashes green while writing the cache data remaining in array controller to
the disk drive.
The LED lights when the cache data is completely written to disk drive and the disk
array unit is ready to power off.
(2) SHUT DOWN LED
(1) SHUT DOWN switch
23
(4) LINK LED
(5) FAULT LED
(6) RS232C connector
(8) Ethernet connector