Table of Contents
Advertisement
(6) AL-PA switch
The AL-PA switch sets the address of the disk array unit as a FibreChannel device in
the host FC loop.
Set an AL-PA so that it will be different from the AL-PAs of other FibreChannel
devices in the same host FC loop.
When installing or replacing the additional control card into the controller,
push it as far as it will go and then secure it with the screws.
Incorrect insertion may cause malfunction.
To use the additional control card, at least a single cache memory
must be installed.
NF2300-SP02E does not contain cache memory.
Purchase the necessary additional cache memory (NF2300-SC01E
or NF2300-SC02E) depending on the environment of the customer
using the disk array unit.
33
Advertisement
Table of Contents
