Fitting The Waste Box; Seam Depth Graduations - Pfaff hobbylock 799 Instruction Manual

After threading, close work support 1,
fold down carrying handle 2 and close
looper cover 3.
Fitting the waste box
Insert the tonues of the box in the
cutouts on the front cover.
Seam depth graduations:
Application example:
If the seam allowance of a cut part is
20 mm, the edge of the butting must
be guided along the 20 mm graduation
on knife guard 10.
Press the waste box downwards
against the front cover until it snaps in
place.
Rmoval of the waste box is carried out
in the reverse order.
14