Threading Thread Guides 2 And 34; Needle Combinations - Pfaff hobbylock 799 Instruction Manual

Threading thread guides 2 and 34
Place thread spools on the spool pins.
Threading must be done carefully. First
thread up guides 2 according to
colours.
Then lift carrying handle 3 and place
the thread in rear guides 34.
Set the thread tensions at N and thread
the machine in the following sequence:
1. right looper (red)
2. left looper (yellow)
3. right needle (green)
4. left needle (blue)
Fold carrying handle 3 down again.
Needle combinations
In the table behind looper cover 12 the
needle combinations for stitch types 1
to 8 are indicated.
Remove any needles not in use by loo
sening their set screws A, B or C (for
needle change see page- 40).
8