Installation and commissioning
8
Connecting the compressed air
.01.02
Fig. 8 - 02
8
Fitting the tape reel bracket
.01.03
Fig. 8 - 03
8 - 2
1
3
● Connect the compressed air hose to
coupling 1.
● Pull regulator 2 up and turn it until
gauge 3 shows an air pressure of 6 bar.
2
3
! Insert tape reel bracket 1 into socket 2,
align it and screw it into place with
screws 3.
1
3
2
The air must be completely oil-
free and dry.
The compressed air quality
influences the service life of the
heating cartridge in the air
heater. If the air is very damp,
a compressed air cold drier with
preliminary filter and secondary
fine filter must be installed in
front of the heat-sealing
machine