Taping foot
This special sewing foot is for sewing
on tapes. On stretch materials (knit-
wear) the seams are prevented from
stretching when a tape is sewn on.
Preparing the machine
Set thread regulator 41 at N
set at
—
use 1 or 2 needles,
depending on tape
width
3 to 5 mm
(adjustable for a tape
width from 4 to
9 mm)
N
N
Inserting the tape
1. Set needle at highest position.
2. Disengage upper knife.
3. Raise sewing foot and place tape in
guides —1— from right.
4. Push tape to right stop with
slide -2-.
5. Adjust location of tape in relation to
needle by turning adjusting
screw -3-,
6. Place fabric in and carry out a
sewing test.
3
2
Differential
feed setting;
Needles;
Stitch width;
Stitch length;
Thread tension;
59