Elastic Tape Sewing Foot - Pfaff hobbylock 799 Instruction Manual

Elastic tape sewing foot
This special foot is for sewing on ela
stic tape; in the same operation the
fabric is trimmed and serged, and also
gathered by the contracting elastic
tape.
Preparing the machine
Set thread regulator 41 at N
set at
—
use 1 or 2 needles,
depending on tape
width
insert elastic taping
foot
N
4 to 4.5
approx. 4
Inserting elastic tape:
Loosen screw —2- so that brake —1- at
opening —4- is opened by 1 .5 to 2
mm. Place in elastic tape —3- and pass
it back under the foot. Tighten brake
—1- with screw —2- again. The more
screw —2- is turned, the stronger the
pressure of brake —1- on the elastic
tape and the greater the gather effect.
Note:
When the sewing foot is raised, the
elastic tape should be pulled through
brake —1- against a slight resistance.
Differential
feed setting:
Needles:
Sewing foot:
Thread tension:
Stitch width:
Stitch length:
58