Jenn-Air PRO-STYLE JDS8860BDP16 Use & Care Manual page 18

OVEN Co KiNG
Convect Options
Cook & Hold (select models) and Delay options are available
when convect cooking. See page 16 for information on how
to program a Cook & Hold or Delay option.
4.
At the end of cooking, turn the oven off by pressing the
CANCEL pad. Remove food from the oven. , ...................
The oven will continue operating until the
CANCEL
CANCEL pad is pressed. ..................
Multiple-Rack
Baking of
Cookies/Biscu its
Breads
Casseroles
Tarts/Tortes
Cakes
Whole Chicken
Whole Turkey
Vegetables
Pork Roasts
Beef Roasts
Frozen Pie
Turnovers
Cream Puffs
Puff Pastry
Convect Bake
To set Convect Bake:
i' Convect )
1. Press the Convect pad. ,, _,
2. Select CNVT BAKE using the Quickset pads.
Rapid Preheat
Use to decrease preheating time when using Bake or Convect
Bake. Use for all foods when baking on one rack.
, After Bake or Convect Bake has been programmed and
activated, press the Rapid Preheat pad.
1 RACK ONLY will display, after 10 seconds the display will
show RAPID and PREHEAT.
To return to Standard Preheat:
, Press Rapid Preheat pad again. Thiswill provide standard
preheat and PREHEATand the selected function will be
displayed.
Notes:
For best results, use rack position 2 or 3 when using the
Rapid Preheat option.
For optimum baking and browning results, Rapid Preheat
is not recommended when baking on multiple racks.
.
q
Select the oven temperature using the Quickset pads
OR
Enter the desired temperature using the number pads.
Press Enter pad to set.
The temperature can be set from 195° F to 550° F
degrees in 5° increments. If Auto Convect Conversion is
turned off, you can set 170° F.
After three seconds, the oven will begin to preheat.
CNVT BAKE and PREHEATwill appear in the display
along with 100° or the actual oven temperature,
whichever is higher.
The temperature in the display will increase in 1o
increments until the oven reaches the preset
temperature. Allow about 15 minutes for the oven
to preheat.
When the oven is preheated, the oven will beep and
PREHEATwill turn off and CNVT BAKE will be displayed.
AUTO will be displayed if Auto Convect Conversion
feature is turned on.
Place food in the oven.
Convect Roast
To set Convect Roast:
1. Place food in the oven.
2. Press the Convect pad.
Convect
3. Select CNVT ROAST using the ..............................
Quickset pads.
J
4. Select the oven temperature using the Quickset pads.
17
OR
5.
Enter the desired temperature using the number pads.
Press Enter pad to set.
, The temperature can be set from 170° F to 550° F
degrees in 5° increments.
Enter desired cook time. Enter the conventional roasting
time using the number pads.