Electronic Oven Control; Quickset Pads; Cancel; Oven Light - Jenn-Air JGS8750CDS00 Use & Care Manual

ELECTRONIC OVEN CONTROL
Model JGS8850 and JGS8860
A BC D E F G
Bake
........................................ Broil
Convect
Rapid
Preheat
C'eon Ti
More
Options
KL M M Q
Wart'n Oven
Drawer
o_/of_ Light
N O P
R S
Model JGS8750
A. Bake F Timer 2 K. More options P. Cancel
B. Favorites G. Number pads L. Clean O. Back
C. Setup H. Broil M. Quickset pads R. Lock
D. Timer 1 I. Convect N. Warm drawer S. Enter
E. Display J. Rapid preheat O. Oven light
A
ii
Bake
G ................................... Broil
More
Options
H
H
B C D E
Favorltes
o,_/o_
Clean
1
Ti_er 1 [ 1 Timner 2
Setup
Oven
o,,/@_ Light CANCEL
J K L M J N
F
2 5
A_C DEE
5 6
JKL _4NO
8 £
TUV WXVZ
O P
A. Bake E. Timer 2 I. Clean M. Cancel
B. Favorites F Number pads J. Quickset pads N. Back
C. Timer 1 G. Broil K. Setup O. Lock
D. Display H. More options L. Oven light R Enter
When pressing any control pad function on the Electronic Oven
Control, use the pad of your finger to press the desired function.
Hold down the pad a few seconds, or until the desired function
appears in the display.
When power is supplied to the range or after a power
interruption, "12:00" and "POWER LOSS" will be displayed.
Press CANCEL to clear "POWER LOSS."
When the oven is in use, the display shows the time of day,
temperature, and oven setting.
When the oven is not is use, the display shows the time of day.
When using the Timer, for settings of 1 to 59 minutes, the display
will count down in minutes and seconds. For settings of 1 hour or
more, the display will count down hours and minutes.
@uck
Quickset pads are located on each side of the display window
and are used to select the desired function or option in the
display window. To select the option or function, press the
Quickset pad next to the word.
If you need to back out of a function or option in the display,
press the BACK pad. When your programming is complete, press
the ENTER pad or wait 4 seconds and the function will start
automatically.
Up arrows indicate additional screens with additional options.
Press the QUICKSET pads next to the arrows to scroll through
the display.
IMPORTANT: Four seconds after entering the function, option,
number or letter, the function will automatically be entered. If
more than 30 seconds elapse between steps in programming,
the function will be canceled and the display will return to the
previous display.
8