Kenmore 911.95475 Owner's Manual page 22

CARE ANBCLEAffiNG
RemovableParts
CLEANING MATERIALS
o Dishwashing detergent
,, Warm water
• Soft cloth
Molded Rib
Clear --_-_,
Groove In
Stem
_
Spring Clip
TO REMOVE
1. Be sure the control knob is in the
off position
2. Pull straight off the stem Using a
piece of string can make removing
the knob easier Slip the string
under and around the knob,
pulling straight out
TO CLEAN
Wash the knob thoroughly with soapy
water Dry completely with a soft
cloth DO NOT let the knob
soak.
TO REPLACE
t. Check the back of the knob
2. The molded rib of the knob is
designed to fit perfectly onto the
knob stem.
8. Align the molded rib to the clear
groove in the knob stem Push the
knob back as far as it will go
/_ CAUTION:
Disconnect
electrical power
to the oven at
the main circuit
breaker or fuse box before
attempting to replace the
oven light bulb, Do not
touch a hot light bulb with
wet hands or a wet cloth,
Wait until the bulb has
cooled and use a dry cloth.
Glass
Live Collar
Bulb
Glass Cover
TO REMOVE THE COVER
1. Disconnect electrical power to the
oven at the main circuit breaker or
fuse box.
2. Grasp the glass cover and turn 1/4
turn counterclockwise until the
tabs of the glass cover clear the
grooves of the glass retainer
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb
TO REPLACE COVER
1. Place the tabs of the glass cover
into the grooves of the glass
retainer
11
3.
Turn the glass cover t/4 turn in the
clockwise direction
Reconnect the electrical power to
the oven
For improved lighting inside the oven,
clean the glass cover frequently
using a wet cloth Caution: This
should only be done when the
oven is completely cool.
22