Before Calling For Service - Kenmore 911.49479790 Owner's Manual

BEFORE CALLING F ORSERVICE
To save you time and money, before making a service call check the list below for any
problem you may feel you have with the performance of your range If the problem is
something you cannot fix use the Consumer Service Numbers located at the back of this
manual When making any calls have the Model No., Repair Parts list,
Use and Care Manual and the Date of Purchase available.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The display of your Range malfunction. Press the CLEAR/OFF
control Is flashing pad Let the oven cool for
"F" followed by a t hour and enter an oven
number or letter, or cleaning operation, If
code repeats, call for
service,
Oven and oven No power to range Check the circuit breaker
control will not or fuse Make sure the
work power cord is plugged in.
Oven temperature Thermostat calibration See the temperature
seems Inaccurate adjustments described
following this section
Oven will not unlock Clean cycle is not Oven temperature must
finished drop below the lock
temperature before the
door will unlock,
Oven light will not a. Light switch in off a,, Check oven light
work position, switch on the control
panel.
b. Oven light bulb b,, Check the oven light
burned ouL bulb,
Oven did not
clean or results
were poor
a. Controls were not set a.
properly,
b. Clean cycle was b.
interrupted.
c. Oven was soiled
heavily,
Clw
Check the self.ocleaning
section of this manual.
The normal clean cycle
should last 4 hours for
heavily soiled oven.
Heavy spillovers
should be removed be-
fore the cycle is set.
You can also repeat
the cycle,