Setting Special Features - Kenmore 911.41885 Series Use & Care Manual

OPERATION
SettingSpecialFeatures
Your control will allow you to lock the
touch pads so they cannot be activated
when pressed If you're worried about
leaving the oven unsupervised, activate
this feature
1. Press and hold, at the same time,
the BAKE and BROIL pads for 3
seconds, until the display shows
"SF."
2. (a) Press the CLEAN pad
The display shows "LOC OFF"
(lockout off)
(b) Press the CLEAN pad again
The display will show "LOC ON"
(lockout on)
3. Press the START pad
This feature can only be set when the
oven is not in use,
When this feature is on, the display will
show "LOC", if a touch pad is pressed
(This feature will not affect the Clock,
Timer or Oven Light pads )
This feature wilt automatically convert
the temperature you set for traditional
baking to convection cooking
1. Press and hold the CONVECTION
BAKE pad for 4 to 5 seconds
2. Press the TEMP UP or DOWN
ARROW pads to set the temperature
3. Press the START pad You will see
the converted temperature in the dis-
play For example, if you entered
375° the display wil! show 350 ° This
conversion will need to be set each
time you use Convection Bake
Your new control has a cook and hold
feature for timed cooking only that will
keep hot cooked foods warm up to 3
hours after the timed cooking is finished
To activate this feature:
1. Press and hold, at the same time,
the BAKE and BROIL pads for
3 seconds, until the display shows
"SF."
2. (a) Press the OVEN COOKING TIME
pad The display will show "HLd
OFF."
,
(b) Press the OVEN COOKING TIME
pad again to activate the feature. The
display will show "HLd ON."
Press the START pad
This special feature will allow you to
change the speed; #1 means speed of
change is slow up to #5 which means
speed of change is fast, To set the
speed you prefer, follow these steps:
1. Press and hold, at the same time,
the BAKE and BROIL pads for 3
seconds, until the display shows
"SF."
2. Press the UP arrow pad The
display will show the current set
speed
3. Press the UP arrow to increase the
speed up to the number 5
or
Press the DOWN arrow pad to
decrease the speed down to the
number 1
4. Press the START pad
19