JVC EXAD KD-AV7000 Instructions Manual page 52

AV2 INPUT SELECT
You can detennine the use of AV INPUT 2
jacks on the hideaway uni_select either
"VIDEO" or "CAMERA."
, When tile playback source is "AV2," this
setting camlot be changed.
CAMERA VIEW
o NORMAL: You can watch tile rear view as
tile camera takes.
, MIRROR: You can watch tile rear view as
reflected on the mhTor.
While watchitlg the cam(,ra view, you can change
it m the sour_ e playback screen by _ouc'hing the
center portion q/the monitor sc_,en. (In this case,
you cam_ot change the a_pect ratio and make
monitor _¢_liustments--_ee pages 24 and 42.)
o VIDEO: Tile source "AV2" works %*"
viewing the playback picture
through the component
comlected to tile AV INPUT 2
,jacks.
o CAMERA: Select this when COmlectiug the
rear view camera.
You can set tile remainhlg two
items (BACK GEAR!
CAMERA VIEW).
BACK GEAR
o AUTO: Tile rear view through tile rear view"
camera is automatically displayed on
tile monitor when you chauge tile
gear to tile back position.
, OFF: Cancels this hlnction. To watch tile
rear view, select "AV2" _w tile
sot_rce.
FM IF FILTER
lu some areas, adjacent stations may interfere
with each odle_: If this iuterfcrence occm's,
noise may be heard.
AUTO: When this type of iuterference occurs,
this unit automatically increases tile
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
o WIDE: Subject to tile iuterfcrence from
adjaceut stations, but sound quality
will not be degraded and the stereo
effect will not be lost.
TV CHANNEL AREA
This appears when TV tuner unit KV-C 1000 is
connected.
, No setting is requh'ed.