Mode Setting - JVC EXAD KD-AV7000 Instructions Manual

Select anappropriate voImne level forthe
componem com_ected totileAVOUTPUT
jacks o l_ the hideaway refit.
, This fm_ctions without respect tothe Dual
Mode s etting.
1
3
4 Adjust the AV output voltaire.
While Dual Mode is M use...
• Tile playback source does not change to
'DISC" though you insert a disc. 'DUAL"
flashes (m tile display of tile main unit.
• You cal ollly adjust the vohlme [eve[ %r
the subsidiary source (the other sound
adiustmems calmot be used for the
subsidiary source).
• For Dual Mode operations...
When coutrollmg tile m(mitor comlected
to tile AV OUTPUT jacks, aim tile
remote controller at the remote sensor
Oil tile main unit.
When coutrollmg the m(mitor inserted
imo the cradle, aim tile remote controller
at tile remote sensol ou tile cradle.
To activate Dual Mode
ZOOM
Each time you press and hold the button,
Dual Mode rams on and off.
• When Dual Mode is turned on, the source
selectio*l screell appears Oil tile monitor
(see page 33).
To opera{e the subsidiary source
1
MA_J[_
2 Press the source buttons, then the
source operation buttons.
To opera{e the main source
1
2 Press the source buttons, then the
source operation buttons.