JVC EXAD KD-AV7000 Instructions Manual page 38

4
Adjust the selected surround or DSP When DSP mode is activated:
mode°
When surround mode is activated:
: Selected automatically
whe_ multi-
cimn*leJ DTS signal is detected (\_.ilile
playing a DVD or a DTS CD). No fnrtber
adiustmem is aliov,.ed.
: Selected automatically whell multi-
chamlei Dolby Digital sig_lai is detected
(while playiIlg a DVD). No timber
adjustmem is allowed.
_: Select either 'MOVIE" or
"MUSIC."
When you select "MLIS1C," you cml ad_}ust
the following items.
_: Select "ON" to add
"wraparomld" somld effect with side-wall
image. To callcel it, select "OFF."
_: Adjust tile center image
so it may be heard only from tile center
speaker, (rely from tile left/right from
speakers as a "phantom" center image, or
various combi*lations of these speakers.
As tile number increases, tile ' phamom"
effect becomes str(mge_: (Normally select
' 4.") To cancel it, select "OFE"
Ex. When selecting "HALL."
@ Select (me of the DSP modes.
HALL: Reprodaces the spatial
fcelillg of a large shoebox-
shaped hall desig_ed
primarily for classical
collcerts,
LIVE:
Reproduces the spatial
fceli*lg of a live music club
with a low ceiling.
CLUB: Reproduces the spatial
fce[illg of a rockillg dance
club.
DOME: Reproduces the spatial
fce[i*lg of a stadium with a
high ceilfllg.
THEATER: Reproduces the spatial
fce[illg of a theater.
@ Adjust tile effect level (from I to 5}.
As tile number increases, tile effect
becomes strollger.