Auto Open/Close; Wiring Check; Blind Control - JVC EXAD KD-AV7000 Instructions Manual

AUTO OPEN/CLOSE BEEPTONE
o AUTO: The monitor comes out _ or goes in
automatically when you turn on or off
tile power.
o OFF:
Cancels this function.
:' If you close the monitor be%re turning off the
powel, the lnonitor will not come out next time you
turn (>_Ithe powec
, ON: Sound beeps when you operate tile
unit.
o OFF: Cancels this flmction.
WiRiNG CHECK
You cau confim_ the wiring connection is
correctly done for particular fuuctions.
BLIND CONTROL
o ON:
The monitor works as Touch PmleI
when playing back pictures on the
Ii]ollitor,
Indicators
, When the listed wires have been connected
and electrical signals are detected through the
wires, tile corresponding indicators light up.
Tile boundaries cannot be shown on
tile monitor screen. This example
is just to teach you where to touch
on tile Touch Panel when you
operate
on it.
d) Uppe "/owe"
po "t o Is
Adjust the volume.
@ Left/nght portions:
• Skips the chapters/tracks for
DVD/VCD.
• Searciles the chapters/tracks flat
DVD/VCD.
• Sem'ches
forTV channels t_r TV
(see page 63).
'(3) (e lte "portion:
TUFIIS
Oil and off the o_3-sc_eeu
icons. (This also works even if
'BLIND CONTROL" is set to
'OFF.")
Dimmer flmction
To use the dhnmer flmction, you need to
connect the [LLUMINATI_ON wh'e to...
• For Auto Dimmer: Connect it to the car
headlight switch. When you turn on the
car lights, dimmer starts working--Auto
Dhnmer
• For Constant Dimmer: Counect it to tile
car battery (constant 12V). Dhnmer works
whenever you turn on the power.
• For Dimmer Off: Connect it to nowhere.
• See also the ]Installation/Connection
Manual (separate volume).
o OFF: Cancels this flmction.